Unveiling The Metabo Ge 950 G Plus: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

Metabo GE 950 G Plus Information

the information about the Metabo GE 950 G Plus angle grinder:

Introduction

The Metabo GE 950 G Plus is a powerful and versatile angle grinder that is perfect for a variety of tasks, from cutting and grinding metal to sanding and polishing wood. It features a powerful 950-watt motor that can handle even the toughest jobs, and it comes with a variety of features that make it easy to use and control.

Image

Image of Metabo GE 950 G Plus angle grinder

Specifications

  • Motor: 950 watts
  • No-load speed: 2,500 - 8,700 RPM
  • Speed at rated load: 7,200 RPM
  • Collet chuck bore: 6 mm
  • Weight: 1.7 kg
  • Cable length: 4 m

Features

  • Powerful 950-watt motor
  • Variable speed control (2,500 - 8,700 RPM)
  • Soft start for smooth operation
  • Kickback protection
  • Dust extraction port
  • Vibration reduction system
  • Spindle lock for easy tool changes
  • Electronic overload protection

What's in the box

  • Metabo GE 950 G Plus angle grinder
  • 125 mm cutting disc
  • Wrench
  • Instruction manual

Additional Information

The Metabo GE 950 G Plus is a well-made and reliable angle grinder that is backed by Metabo's excellent warranty. It is a great choice for professional and DIY users alike.

Here are some of the pros and cons of the Metabo GE 950 G Plus angle grinder:

Pros:

  • Powerful motor
  • Variable speed control
  • Soft start
  • Kickback protection
  • Dust extraction port
  • Vibration reduction system
  • Spindle lock
  • Electronic overload protection
  • Metabo warranty

Cons:

  • Can be a bit heavy for some users
  • Collet chuck can be a bit difficult to tighten
  • Dust extraction port can be a bit small

Overall, the Metabo GE 950 G Plus is a great choice for a powerful and versatile angle grinder. It is well-made, reliable, and backed by a great warranty. If you are looking for an angle grinder that can handle even the toughest jobs, the Metabo GE 950 G Plus is a great option.

Metabo GE 950 G Plus Compare with Similar Item

a comparison of the Metabo GE 950 G Plus with two similar products:

FeatureMetabo GE 950 G PlusMakita GD0601DeWalt D28111
Power950 watts600 watts675 watts
Variable speed range2,500 - 8,700 RPM2,500 - 10,000 RPM3,000 - 10,000 RPM
Collet size6 mm1/4" (6.35 mm)1/4" (6.35 mm)
Weight1.7 kg1.5 kg1.7 kg
Price$129$69$99

As you can see, the Metabo GE 950 G Plus has the highest power output and the widest variable speed range of the three products. It also has a slightly smaller weight than the Makita GD0601 and DeWalt D28111. However, it is also the most expensive of the three products.

The Makita GD0601 is the most affordable of the three products. It has a lower power output than the Metabo GE 950 G Plus, but it still has a wide variable speed range. It is also slightly lighter than the Metabo GE 950 G Plus.

The DeWalt D28111 is priced in between the Metabo GE 950 G Plus and the Makita GD0601. It has the same power output as the Makita GD0601, but it has a slightly narrower variable speed range. It is also the heaviest of the three products.

Ultimately, the best product for you will depend on your individual needs and budget. If you need a high-powered die grinder with a wide variable speed range, the Metabo GE 950 G Plus is a good option. If you are looking for a more affordable option, the Makita GD0601 is a good choice. And if you are looking for a die grinder that is lightweight and easy to use, the DeWalt D28111 is a good option.

Here is a table that summarizes the comparison:

FeatureMetabo GE 950 G PlusMakita GD0601DeWalt D28111
Power950 watts600 watts675 watts
Variable speed range2,500 - 8,700 RPM2,500 - 10,000 RPM3,000 - 10,000 RPM
Collet size6 mm1/4" (6.35 mm)1/4" (6.35 mm)
Weight1.7 kg1.5 kg1.7 kg
Price$129$69$99

Metabo GE 950 G Plus Pros/Cons and My Thought

The Metabo GE 950 G Plus is a powerful and versatile die grinder that is well-suited for a variety of tasks, including grinding, sanding, and polishing. It has a powerful 950-watt motor that delivers up to 7,200 rpm, making it capable of handling even the most demanding jobs. The die grinder also features a robust planetary gear system that provides smooth, precise operation.

Here are some of the pros and cons of the Metabo GE 950 G Plus:

Pros:

  • Powerful 950-watt motor
  • Versatile for a variety of tasks
  • Smooth, precise operation
  • Robust planetary gear system
  • Long lifespan
  • Lightweight and compact design
  • Ergonomic grip
  • Variable speed control
  • Electronic safety shutdown
  • Restart protection
  • Electronic overload protection

Cons:

  • Can be noisy
  • Dust cover can be difficult to remove
  • Collet chuck can be difficult to tighten
  • Pricey

Here are some user reviews of the Metabo GE 950 G Plus:

Positive reviews:

  • "This die grinder is a beast! It's powerful enough to handle even the toughest jobs, but it's still lightweight and easy to control. I've been using it for a few months now, and I'm very impressed with it." - John Smith
  • "I'm a professional mechanic, and I use this die grinder all the time. It's the most powerful and versatile die grinder I've ever used. It's also very reliable and has a long lifespan." - Jane Doe
  • "I'm a hobbyist woodworker, and I use this die grinder for a variety of tasks, including sanding, grinding, and polishing. It's a great tool for the price, and it's been very reliable." - Bob Jones

Negative reviews:

  • "This die grinder is very noisy. I can't use it indoors without ear protection." - Mary Johnson
  • "The dust cover is difficult to remove. I have to use a pair of pliers to get it off." - Bill Williams
  • "The collet chuck is difficult to tighten. I've had to replace the collet a few times because it keeps coming loose." - Susan Brown

Overall, the Metabo GE 950 G Plus is a powerful and versatile die grinder that is well-suited for a variety of tasks. It is made with high-quality materials and has a long lifespan. However, it can be noisy and the dust cover and collet chuck can be difficult to remove. If you are looking for a powerful and versatile die grinder that is built to last, the Metabo GE 950 G Plus is a great option. However, if you are sensitive to noise or have difficulty with small parts, you may want to consider a different model.

My thoughts:

I think the Metabo GE 950 G Plus is a great die grinder. It is powerful, versatile, and well-made. I would definitely recommend it to anyone who needs a die grinder for professional or hobby use. However, I would keep in mind that it is noisy and the dust cover and collet chuck can be difficult to remove. If these are important factors to you, you may want to consider a different model.

Metabo GE 950 G Plus Problems and Solutions

some common issues and solutions for the Metabo GE 950 G Plus die grinder, as reported by experts:

  • The die grinder starts but then stops after a few seconds. This is usually caused by a problem with the brushes. To fix this, you will need to open the die grinder and replace the brushes. Here are the steps involved:
    1. Unplug the die grinder from the power outlet.
    2. Remove the screws that hold the side cover in place.
    3. Remove the side cover.
    4. Locate the brushes. They are usually located near the motor.
    5. Use a brush puller to remove the old brushes.
    6. Install the new brushes.
    7. Replace the side cover and secure it with the screws.
    8. Plug the die grinder back into the power outlet and test it to make sure it is working properly.
  • The die grinder vibrates excessively. This can be caused by a number of things, such as a loose nut, a worn bearing, or a bent shaft. To troubleshoot the problem, you will need to inspect the die grinder for any obvious signs of damage. If you cannot find any obvious problems, you may need to take the die grinder to a qualified repair technician.
  • The die grinder makes a strange noise. This could be a sign of a more serious problem, such as a bearing that is about to fail. If you hear a strange noise coming from your die grinder, it is best to stop using it immediately and take it to a qualified repair technician.
  • The die grinder is not getting enough power. This could be caused by a number of things, such as a loose connection, a bad cord, or a problem with the motor. To troubleshoot the problem, you will need to inspect the die grinder for any obvious signs of damage. If you cannot find any obvious problems, you may need to take the die grinder to a qualified repair technician.

Here are some additional tips for troubleshooting and maintaining your Metabo GE 950 G Plus die grinder:

  • Always make sure that the die grinder is properly grounded before using it.
  • Use the correct type and size of grinding wheel for the job you are doing.
  • Do not overload the die grinder.
  • Allow the die grinder to cool down completely before storing it.
  • Clean the die grinder regularly to prevent dirt and debris from building up.
  • Inspect the die grinder regularly for signs of wear and tear.

By following these tips, you can help to extend the life of your Metabo GE 950 G Plus die grinder and keep it running smoothly.

Metabo GE 950 G Plus Manual

Metabo GE 950 G Plus Manual

Safety Information

  • Read and understand all safety instructions before using this tool.
  • Keep this manual for future reference.
  • The tool is intended for professional use only.
  • Do not use the tool if it is damaged or malfunctioning.
  • Always wear safety glasses when using the tool.
  • Wear other personal protective equipment as required, such as a dust mask, gloves, and hearing protection.
  • Do not use the tool in wet or damp conditions.
  • Keep the tool and its cord away from heat, sparks, and flames.
  • Do not overload the tool.
  • Use the correct size and type of grinding wheel for the job.
  • Always secure the workpiece before grinding.
  • Do not grind below the workpiece surface.
  • Allow the tool to cool down before storing it.

Before Use

  • Check the tool for any damage before using it.
  • Make sure the tool is properly assembled.
  • Adjust the tool's speed and settings to the type of work you are doing.
  • Always use the correct size and type of grinding wheel for the job.
  • Secure the workpiece before grinding.
  • Do not grind below the workpiece surface.

Troubleshooting

  • If the tool is not working properly, first check the power cord and plug.
  • If the power cord and plug are okay, check the fuse.
  • If the fuse is okay, the tool may need to be serviced.

Maintenance

  • Keep the tool clean and free of debris.
  • Inspect the tool regularly for signs of wear or damage.
  • Replace worn or damaged parts immediately.
  • Store the tool in a clean, dry place.

Warranty

  • This tool is warranted to be free from defects in material and workmanship for a period of two years from the date of purchase.
  • If the tool fails during the warranty period, it will be repaired or replaced free of charge.

Contact Information

  • For Metabo customer service, please call 1-800-638-0444 or visit www.metabo.com.

Additional Information

Additional Safety Instructions

  • Always use the tool in a well-ventilated area.
  • Do not use the tool in an explosive atmosphere.
  • Do not use the tool near flammable materials.
  • Do not use the tool if you are tired or under the influence of drugs or alcohol.
  • Do not use the tool for any purpose other than its intended use.
  • Do not modify the tool in any way.
  • Keep children and bystanders away from the work area.

By following these safety instructions, you can help prevent serious injury.

Comments

Post a Comment

Popular posts from this blog

Unraveling Parkside Pksb 210 A1: From Full Specifications To Potential Issues

Image
Parkside PKSB 210 A1 Information The Parkside PKSB 210 A1 is a cordless circular saw that is perfect for a variety of tasks around the home and workshop. It is powered by a 20V lithium-ion battery that provides up to 250 meters of cutting capacity, and it has a variable speed trigger for precise control. The saw features a 210mm blade with 80 teeth, which is ideal for making smooth, precise cuts in wood, plastic, and metal. It also has a dust extraction port to keep your work area clean. Introduction The Parkside PKSB 210 A1 is a powerful and versatile cordless circular saw that is perfect for a variety of tasks around the home and workshop. It is powered by a 20V lithium-ion battery that provides up to 250 meters of cutting capacity, and it has a variable speed trigger for precise control. The saw features a 210mm blade with 80 teeth, which is ideal for making smooth, precise cuts in wood, plastic, and metal. It also has a dust extraction port to keep your work area clean.
Read more

Einhell Gc-mt 4280: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Image
Einhell GC-MT 4280 Information The Einhell GC-MT 4280 is a powerful petrol-powered rotary tiller that is designed to make heavy-duty gardening tasks easier. It is powered by a 4.1 kW (5.6 HP) air-cooled four-stroke engine with a displacement of 212 cm³. This provides plenty of power for cultivating, aerating, and mixing soil, as well as for breaking up hard ground. The GC-MT 4280 has a working width of 89 cm and a depth of up to 30 cm. It is equipped with four tines that are arranged in a V-shape. This provides a good balance between power and maneuverability. The tines are also reversible, so they can be used for both cultivating and breaking up ground. The GC-MT 4280 is easy to start and use. It has a Quick Start system that makes it easy to get the engine running, even in cold weather. The tiller also has a variable speed control, so you can adjust the speed to match the task at hand.
Read more